Questions? Give us a call at 847-380-1466

2013 Hyundai Genesis Coupe Multicolor Fog Light LEDs

Your Price: $74.99
Retail Price:$99.00
Your Savings:$24.01(24%)
In Stock
Part Number:MFK-1428-H8

Choose Options

RGB Controller

Diode Dynamics is proud to introduce a revolutionary new product: PRISM Multicolor LED bulbs, for direct replacement in any fog light or DRL application. By using an RGB controller, you can set them to any color imaginable, or use any lighting mode offered by the controller.

The bulbs utilize bright 5050-size SMD chips, and are designed to be a direct replacement for the factory bulb, with OEM-size sockets. The bulbs have been tested for reliability over time, with an expected life of 40,000 hours.

This is an exclusive product, designed and developed by Diode Dynamics LLC.


The whole system is 100% plug-and-play. No cutting, no ballasts, no wiring to your battery. Here's how to install:

  1. Remove your factory bulb, and replace it with the PRISM bulb.
  2. Plug the PRISM bulbs into an RGB controller. 
  3. Plug RGB controller into your factory socket, with included signal wire.

It's as easy at that! Installation should take 10-15 minutes on most vehicles.


Included in your order:

  • - Two PRISM RGB Multicolor bulbs
  • - Power connector wire (plugs directly into your factory socket) 
  • - RGB Controller (optional, see below)


You must use an RGB controller to power and control the bulbs. The bulbs use a standard 4-pin connector, with a common positive (+) wire.

These bulbs are compatible with all other Diode Dynamics RGB products, such as our RGB controllers, RGB 2-way splitters, and RGB extension wires.

All Diode Dynamics RGB controllers come with four (4) RGB outputs. For example, if you would like to purchase a set of PRISM bulbs for your fog lights and DRLs, you would just need one controller. If you already have an RGB controller for your footwell lighting, you can simply add these to that controller if you'd like. Keep in mind that all RGB lights on one controller will work together.


    Please note: We recommend a fog light application. If you install in a DRL/high beam application, the LEDs will still turn on as your high beams, but will not project as much light as the factory light. This product is intended for its cosmetic upgrade benefits.

    Related Items

    Recently Viewed Items