Trunk lights are used in the trunk or cargo area to illuminate the space at night. From the factory, the bulbs are incandescant, lighting up in a yellowish color.
By changing the factory bulb to an LED, you can illuminate the area with a much brighter light, and add a pure white, luxury look.
The installation is 100% plug-and-play, just replace your factory bulb.
Stage 1: 2-5050 SMD. This bulb has a standard festoon base, with two 5050-size Epistar SMDs and a protective cover for added durability and style.
Stage 2: 6-5050 SMD. Standard festoon base, with six 5050-size Epistar SMD chips arranged on a rectangular panel.
Stage 3: 12-SMD Board. This is an LED panel, fitted with 12 5050-size Epistar SMD chips. Comes with spring-loaded festoon-style adapter for direct installation. Plug the adapter into the bulb socket, then just stick the board in place with the mounting adhesive pad. This may need to be mounted to the exterior of your trunk light housing.
Stage 4 FlexLight: 30-5050 SMD Strip. This is a 20-inch, low-profile LED strip, with 30 5050-size Epistar SMD chips. Comes with spring-loaded festoon-style adapter for direct installation. Mounts in your trunk area, flexible and waterproof, for maximum brightness.
Fitment. All bulbs use a standard 31mm terminal, with aluminum contacts, designed for exact replacement of your factory 31mm festoon bulb. Just remove the old bulb, and plug in the new LED.
PLEASE NOTE: Stage 3 is an LED board, which may mount to the exterior of your trunk light housing.Stage 4 FlexLight is an LED strip, which plugs into your factory trunk light socket, and mounts directly into your trunk area using included adhesive strips or velcro. If you would like a direct replacement bulb, we recommend stage 1 or 2. We offer stage 3 and 4 for those who want to maximize brightness.
Included in your order is ONE BULB.
These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.
We strongly recommend white or warm white for the best visibility.
At Diode Dynamics, we rate the brightness of LEDs in "stages" so you can choose what fits you best.
Stage 1: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.
Stage 2: Slightly higher brightness than OEM bulbs.
Stage 3: Much brighter than OEM bulbs. These are bright!
Stage 4 FlexLight: Extremely bright compared to OEM bulb.
Lumens. 99% of sellers online simply provide "calculated" lumen numbers based on the maximum potential brightness of the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is far from accurate, as the design of an LED bulb rarely provides the proper conditions for maximum brightness, once it is all put together. We do not provide calculated numbers, as we believe it is misleading to the consumer. Please reference our pictures for brightness comparison. We do not currently list lumen brightness ratings for our products yet- however, we've just purchased the required equipment, and will be posting accurate measurement numbers soon!
LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.
While our bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.
Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.
Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.
Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.