An exhaust system is usually piping used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove. The entire system conveys burnt gases from the engine and includes one or more exhaust pipes. Depending on the overall system design, the exhaust gas may flow through one or more of: Axle-back exhaust systems bolt in place of the factory muffler section and upgrades it with a sporty free flowing muffler. These exhaust systems are simple to install and take just a few minutes on most vehicles. Cat-back (also cat back and catback) refers to the portion of the exhaust system from the outlet of the catalytic converter to the final vent to open air. This generally includes the pipe from the converter to the muffler, the muffler, and the final length of pipe to open air. Cat-back exhaust systems generally use larger diameter pipe than the stock system. Good systems will have mandrel-bent turns that allow the exhaust gases to exit with as little back pressure as possible. The Turbo-back (or turbo back) is the part of the exhaust system from the outlet of a turbocharger to the final vent to open air. Turbo-back systems are generally produced as aftermarket performance systems for cars with turbochargers. Some turbo-back (and header-back) systems replace stock catalytic converters with others having less flow restriction.